pasiūlyti gerą pasiūlymą
ToughTek M680a Mortar Pump
A better way to spray heavy, gritty materials
Portable sprayer for mortar, cementitious and heavily filled materials
A profitable shortcut to hand troweling
Hand troweling cementitious materials is time-consuming. Save time, speed up the process and increase your profits by using a ToughTek M680a Mortar Pump to spray and finish-trowel the material instead of using the traditional hawk and trowel method.
The ToughTek M680a Mortar Pump is engineered to withstand the grittiest of materials, yet is easy to use and clean. Its high velocity flush is often all you need to clean the pump and prevent build-up in the lines.
The ToughTek M680 Mortar Pump. Simply a better alternative to hand troweling.
Benefits:
Materials and applications:
Primary features:
M680 Mortar Sprayer Package |
|
Maximum Working Pressure |
7 MPa, 70 bar |
Maximum Air Inlet Pressure |
0.7 MPa, 7 bar |
Minimum Inlet Air Flow (Typical) |
0.85 cubic meters per minute |
Minimum Inlet Air Flow (Pump Only) |
0.06 cubic meters per minute per liter at 7 bar |
Pressure Ratio (Fluid to Air) |
10:1 |
Air Motor Piston Diameter |
191 mm |
Stroke Length |
120 mm |
Lower Output |
686 cc per cycle |
Flow Rate at 30 cycles per minute |
20.6 lpm |
Flow Rate at 60 cycles per minute |
41.2 lpm |
Air Inlet Size |
3/4 npt(f) (Chicago Fitting) |
Fluid Inlet Size |
2 in. Cam Groove (Male) |
Fluid Outlet Size |
1 npt(f) with a 1 in. Cam and Groove Fitting |
Weight (without fluid) |
113 kg, (with 7.6 m of 25 mm hose and 3.0 m of 19 mm hose) |
Sound Pressure |
118 dB(A)* |
Sound Power |
118 dB(A)* |
Dimensions |
|
Height |
113 cm |
Width |
70 cm |
Depth (pump on cart only) |
81 cm |
Deep (pump on cart with hopper) |
94 cm |
Maximum Pump Speed, Do not exceed maximum recommended pump speed of fluid pump to prevent premature pump wear) |
|
Spraying |
40 cycles per minute (typically less than 10 cycles per minute) |
Flushing |
60–90 cycles per minute (only when pumping flushing fluid) |
Wetted Parts |
|
Entire System |
Stainless steel, UHMWPE, nylon, plated steel, anodized aluminum, FX-75 |
Pump |
Stainless steel, carbide, PTFE, UHMWPE, solvent-resistant o-rings |
Hose Kits |
Nylon core, plated carbon steel fittings, anodized aluminum, nitrile gaskets |
Notes |
|
* Spraying simulated acoustical texture under typical conditions as |